How do I connect Wave DX to my computer?

Wave DX connects to your computer through an audio interface, such as Wave XLR. Connect Wave DX to the interface using a standard 3-pin XLR cable, then connect the interface to your computer. The mic does not connect directly via USB.

What cables do I need?

You’ll need a standard 3-pin XLR cable to connect the mic to your audio interface, mixer, or preamp. An XLR cable is not included in the box.

Does it work with any audio interface?

Yes. Wave DX works with any compatible XLR audio interface, mixer, or preamp. It does not require Wave XLR or other Elgato hardware.

Does it work with Wave Link?

Yes. Wave DX can be used with Wave Link for mixing, routing, and effects. Since Wave DX connects through an audio interface, Wave Link will show the interface as the input, not the microphone itself.

Does it require phantom power?

No. Wave DX is a dynamic microphone, so it does not require phantom power. If your audio interface has a 48V phantom power setting, you can leave it turned off.

How much gain should I use?

For best results, start with 45 dB of gain, then fine-tune as needed. Increase the gain if your voice is too quiet, or lower it if your audio sounds distorted or clips.

Will it fit my mic arm or stand?

Wave DX uses a standard 5/8" mount and includes 3/8" and 1/4" thread adapters, making it compatible with virtually any standard mic arm or stand.

Which end of the mic should I speak into?

Speak into the top of the mic, not the side. Wave DX is a top-address microphone, which means it captures your voice from the end of the grille.

How close should I be to the microphone?

For the best sound, keep Wave DX about 3–5 inches (8–12 cm) from your mouth. Dynamic microphones work best up close, helping your voice sound fuller and clearer while reducing background noise.

How well does it handle background noise?

As a dynamic microphone, Wave DX is good at limiting room sound and background noise compared with many condenser microphones. This makes it a strong choice for streaming, podcasting, and recording in shared or less-than-perfect spaces.

Do I need a booster or lifter?

No. Wave DX has a high enough output to work with any standard XLR audio interface without a booster or lifter.

What is the difference between Wave DX and Wave:3?

Wave DX is a dynamic XLR microphone that connects through an audio interface and naturally rejects more background noise. Wave:3 is a USB condenser microphone that plugs directly into your computer for a simpler setup, but picks up more room sound.

£109.99

Wave DX - White

Name: Wave DX - White
Brand: Elgato
SKU: 10MAH9901-WH23007
Price: 109.99 GBP
Availability: InStock
Rating: 4.9 (84 reviews)

Dynamic Vocal Microphone

4.9(84 reviews)

A dynamic mic that captures detail like a condenser without the noise, Wave DX is a remarkable feat of audio engineering. Connect any XLR audio interface. No booster necessary.

Awards

Editor's Choice

"The sound of the Wave DX is impeccable. It gives you a great sound palette with which to work."

Color

Out of stock

Add your interface

£159.99

Out of stock

£19.99

Choose your mount

£89.99

£59.99

Save and get the full experience

£379.96

Out of stock

£309.96

Out of stock

Subtotal

£109.99

Expected to ship by 08/03

£109.99

Incredible Sound right out of the box

Don’t just take our word for it. Grab your headphones and let Wave DX do the talking.

Warm, true-to-life character

For pro audio production

Brilliant detail and clarity

Without unwanted background noise

Forgiving cardioid polar pattern

Speak off-axis and still be heard

Works with any XLR audio interface

No booster necessary

Made For Broadcasters

Made For Commentators

Made For Podcasters

Made For Creators

A DYNAMIC MIC LIKE NO OTHER

Broadcast Ready

The finely tuned frequency response range reproduces precise vocals without coloration — perfect for sculpting your signature sound with effects and EQ.

A Capsule Of Magic

Selected in close cooperation with Lewitt Audio, the dynamic capsule inside Wave DX is a remarkable feat of audio engineering. Just take a listen.

True Performer

An optimized proximity effect lets you shape your voice naturally. The closer you get, the bigger the bass.

Smooth Talker

Crafted with acoustically engineered nylon fiber sandwiched between two layers of foam, the internal pop shield reduces plosive breath sounds.

Radically Clear

A dynamic microphone that picks up detail like a condenser? That's right. Wave DX captures lifelike lows and luscious highs while rejecting room noise. It’s hard to find a mic that can do both.

Zero Circuitry. Pure Analog. Ear Candy for your audience.

Pro Sound. Pro Build.

Removable logo

Mount on either side and rotate the logo to look right on camera.

Mono swivel mount

Adjust without jamming your cable
Compatible with all mic arms
5/8" mount with 3/8" and 1/4" thread adapters included

Hardened steel chassis

Extra durable
Reduces internal noise artifacts

XLR output

Connect your interface

Works with any XLR interface. Even better with Wave XLR.

Wave DX works seamlessly with Wave XLR, a compact USB interface packing features you won't find in conventional audio interfaces. Like proprietary anti-distortion technology, a capacitive mute button, direct integration with Wave Link mixing software, and an interchangeable faceplate.

Discover Wave XLR

Marketplace

Thousands of Effects

Add audio effects from Marketplace or third-party VST plugins directly to your Wave Link mixer, no manual install needed. Apply them to any input channel — like your microphone, game, or voice chat — then customize settings to create a sound all your own.

Discover audio effects

COMPARE MICROPHONES

Professional audio, your way. Choose the Wave mic that works best in your setup.

Highlight differences

Wave DX

Wave:3 MK.2

Basic info

Price

Description

Dynamic XLR microphone

USB condenser microphone

Recommended for

Podcasting

Streaming

Rating

*Rating includes reviews from both Wave:3 generations

AUDIO

Capsule type

Dynamic

Condenser

Frequency response

50 Hz – 15 kHz

70 Hz – 20 kHz

Polar pattern

Cardioid

Sample rate

48 kHz

Bit depth

24-bit

Max SPL

130 dB

Sensitivity

2.5 mV/Pa, -52 dbV/Pa

-20 dBFS

Dynamic range

110 dB

Impedance

600 Ohm

Pop filter

Internal

PROCESSING

Wave FX Processor

Onboard DSP

Digital signal processing

VST Inserts

Clipguard

Clipguard 2.0

CONTROLS & MONITORING

Tap to mute

LED ring

Auto Gain

Dial control

Gain, Voice Tune, headphone volume, monitor mix

Headphone jack

3.5 mm stereo

Headphone support

Most studio and gaming headphones

Real-time monitoring

System, voice (with onboard DSP)

HARDWARE

Dimensions

D x W x H

53 × 53 × 146 mm

46 × 85 × 167 mm (without stand)

Weight

440 g

250 g (without stand)

Desk stand

Mounting point

For mic arms (sold separately)

5/8-inch thread

1/4-inch thread

Thread adapters

3/8-inch, 1/4-inch

5/8-inch, 3/8-inch

SOFTWARE

Works with Wave Link

With optional interface

Up to 5 mixes

With optional interface

One-click routing

With optional interface

App grouping

With optional interface

VST effects

With optional interface

Guided setup

With Wave interface

Voice Focus

With Wave interface

COMPATIBILITY

Connection

XLR (requires audio interface)

USB-C

Stream Deck compatible

Via Wave Link plugin

With any interface

Recommended mic arm

Sold separately

Wave Mic Arm LP, Wave Mic Arm Pro

Wave Mic Arm MK.2, Wave Mic Arm LP, Wave Desk Stand

Accessories

Sold separately

Wave Shock Mount

DIVE DEEP

Explore the software that powers your sound — from Voice Focus for studio-quality clarity when coupled with Wave XLR to Wave Link 3.0 for complete audio control.

Quick Guide to VST3 Effects

Download a VST3 from Marketplace, install it, and start using pro-level audio effects in Wave Link or your DAW.

Wave Link 3.0 Explained

Learn how Wave Link 3.0 transforms your workflow with powerful tools for creators — from advanced routing to streamlined audio control.

Elgato Voice Focus

Voice Focus is Elgato’s AI-powered audio effect that makes your voice sound clear and professional in any environment. Available as a VST3 and AU plugin.

Say Goodbye to Snappy “S” Sounds 🎙️

Tired of piercing “S” sounds in streams or podcasts? De‑Esser automatically detects sibilance and softens harsh highs — no complex setup needed. Ideal for beginners and pros alike.

Dual-PC Audio Made Easy with Wave Cast

Whether you stream or record, Wave Cast links your gaming PC and streaming PC and routes audio seamlessly — game sound, mic input, alerts or chat — all with minimal delay and no extra hardware.

Wave DX - White

Dynamic Vocal Microphone

Awards

Editor's Choice

Color

Add your interface

Choose your mount

Save and get the full experience

Incredible Sound right out of the box

Warm, true-to-life character

Brilliant detail and clarity

Forgiving cardioid polar pattern

Works with any XLR audio interface

Made For Broadcasters

Made For Commentators

Made For Podcasters

Made For Creators