Question 1

What does “low profile” mean?

Accepted Answer

“Low profile” means the arm sits below shoulder level to stay out of the way while you work, stream, or record. It helps keep your setup clean while giving you flexible mic positioning.

Question 2

Will it work with my desk or table?

Accepted Answer

The clamp supports most surfaces up to 60 mm / 2.4 in thick, with a wide pad that grips uneven edges or lips. Its compact design and pull-down ratchet handle make it easy to install even in tight spaces.

Question 3

Is it compatible with my microphone?

Accepted Answer

Wave Mic Arm Pro works with virtually any USB or XLR microphone up to 3 kg / 6.6 lb. It comes with a 1/4" thread plus 3/8" and 5/8" adapters, supporting popular models like Wave DX, Shure SM7B, Blue Yeti, HyperX QuadCast, and Rode PodMic.

Question 4

How much space does it need under a monitor?

Accepted Answer

Wave Mic Arm LP sits about 60 mm (2.4 inches) above the desk, or 100 mm (3.9 inches) with the riser attached. You need at least this much space between your desk and the bottom of your monitor. If your monitor sits lower, you may need to mount the arm to the side instead.

Question 5

Can I mount it somewhere other than the edge of my desk?

Accepted Answer

Yes. With Wave Desk Plate, sold separately, you can mount the arm anywhere on a flat wooden surface. It screws directly into a desk or table, with no cutouts required.

Question 6

Can I mount other gear besides a mic?

Accepted Answer

While designed for microphones, Wave Mic Arm Pro can hold cameras, Prompter, and similar equipment up to 3 kg / 6.6 lb. Just thread your gear onto the arm's 1/4-inch mounting screw.

Question 7

Does it have cable management?

Accepted Answer

Yes. Wave Mic Arm Pro has hidden cable channels with magnetic covers. Run your USB or XLR cable underneath the arm for a clutter-free setup.

Question 8

Can I make it taller?

Accepted Answer

Yes. With the clamp secured to your desk, insert the included riser into its post. Then slot Mic Arm Pro into the riser to add 40 mm / 1.5 in of height — enough to clear many objects on your desk.

Question 9

How do I swap out hinge caps?

Accepted Answer

The hinge caps on Wave Mic Arm Pro are magnetic. Pry an edge outward with your fingernail to release the hold, then pull it off. Snap the new cap into place — it'll click right on.

Question 10

What’s the difference between Wave Mic Arm LP and Wave Mic Arm Pro?

Accepted Answer

Both are low-profile mic arms. Wave Mic Arm Pro is designed for more advanced studio setups, with gas suspension for smooth one-handed movement. Wave Mic Arm LP is a great choice for standard creator, streaming, and remote work setups.

WAVE MIC ARM PRO

Bras de micro à profil bas.

Couleur

Incroyablement flexible.
Parfaitement construit.
Conçu pour rester discret
et s'adapter à vous.

LE BRAS DE MICRO POUR LES PROS

CHOISISSEZ VOTRE STYLE

OPTIONS POUR CHAQUE CONFIGURATION

FIXEZ VOTRE MICRO

AU-DELÀ DES ATTENTES

UN SON EXCEPTIONNEL

VUE CLAIRE

S'ADAPTE À VOUS

DIVE DEEP

Elgato Voice Focus

Wave Link 3.0 Explained

Wave Mic Arm MK.2 vs Mic Arm Pro

Quick Guide to VST3 Effects

Say Goodbye to Snappy “S” Sounds 🎙️

Dual-PC Audio Made Easy with Wave Cast

Votre créativité, notre inspiration

POIDS

CHARGE MAXIMALE

PORTÉE DU BRAS

ROTATION VERTICALE

ROTATION HORIZONTALE

DÉGAGEMENT EN SURFACE SANS ÉLÉVATEUR

DÉGAGEMENT EN SURFACE AVEC ÉLÉVATEUR

HAUTEUR DE LA REHAUSSE

OUVERTURE DE LA PINCE DE BUREAU

FIXATION PAR FILETAGE

ADAPTATEURS DE FILETAGE

Contenu de la boîte

Des emballages éco-responsables

OFFRES, NOUVEAUTÉS ET EXCLUSIVITÉS

ENTREPRISE

Assistance

Entreprises