USB HubUser manual
Short on ports? Now Stream Deck + doubles as a USB Hub. Connect up to four devices around back, even charge your laptop—all with just one USB-C cable.
AT A GLANCE
- Connect up to four devices from a single USB-C port
- Powers your laptop*, freeing up a USB-C charging port
- Transfer your files at high speed up to 5 Gb/s via USB
- Access your SD or microSD card files with convenience
- Stays hidden to save desk space and reduce cable clutter
- Brings your computer ports within an easy arm’s reach
- Assemble in seconds, no special drivers or software needed
PRODUCT HIGHLIGHTS
- USB-C plug slots into matching Stream Deck + port
- 2x USB-A (3.2 Gen 1) ports to connect peripherals like keyboards and mice
- 2x USB-C (3.2 Gen 1) ports to connect the latest, high-performance devices
- USB-C uplink connects to your computer and delivers 65 W to charge laptops
- Power input delivers up to 100 W via external USB-C power supply*
- Card reader with SD and microSD slots, fast UHS-I transfer speeds
Getting started
Installation
Step 1
Use a Phillips screwdriver* to loosen both screws and remove your Stream Deck + pedestal.*Not included
Step 2
Carefully align and insert the USB-C plug on USB Hub into the matching USB-C connector on Stream Deck +.
Step 3
Remove the protective film underneath USB Hub to expose its adhesive pad. Then reposition the pedestal and press firmly against USB Hub, ensuring screw holes are aligned.
Step 4
Tighten both screws using your screwdriver to secure the pedestal to Stream Deck +.
Step 5
Connect an external USB-C power supply* (100 W, PD 3.0 minimum) to the port furthest on the right.*Not included
Step 6
Using the USB-C to USB-C cable in your box, connect your computer via the uplink port second to the right. This one cable transfers data and delivers up to 65 W to charge laptops.⚠️ Only use the supplied cable. A USB 3.2 connection is needed for the hub to work reliably.
Step 7
Connect up to four devices using the Type-A and Type-C ports on USB Hub.❗ All four ports have a combined downlink speed of 5 Gb/s and support USB up to 3.2 Gen 1. For best results, avoid using multiple high-data-rate devices, like capture cards, at once..
Step 8
Access your photos and videos using two convenient card reader slots, compatible with SD, microSD, and even CompactFlash formats.
Tech Specs
DOWNLINK PORTS
2x USB 3.2 Gen 1, Type-A | 2x USB 3.2 Gen 1, Type-CDOWNLINK SPEED
5 Gb/s combinedUPLINK PORT
USB 3.2 Gen 1, Type-CUPLINK POWER DELIVERY
Up to 65 WPOWER INPUT
USB 3.2 Gen 1, Type-CPOWER DELIVERY
Up to 100 W (PD 3.0)CARD READER
SD, microSDDIMENSIONS
88 (W) x 76 (D) x 58 (H) mm | 3.46 x 1.53 x 0.74 inWEIGHT
89 g | 3.14 ozIn the box
USB Hub for Stream Deck +USB-C to USB-C cable (100 cm | 39 in)Quick Start Guide
Conscious Packaging
Our goal is to be 100% plastic-free. We're at 95% and counting. Since launching our first capture device in 2012, we’ve taken impressive strides not only in advancing our technology but also our packaging. Learn More
System Requirements
USB Type-CWindows 10 (64-bit) or latermacOS 13 or laterExternal USB-C power adapter (100 W, PD 3.0 minimum)