How To

How to Set Up Wave Go for Interviews, Vlogs, and Outdoor Recording

Last updated:

With Wave Go, you can clip a wireless microphone to your shirt or hold it out for a street interview, and record clear audio straight to your phone.

Getting started

Plug the USB-C receiver into your phone, turn on the mic transmitter, and you’re ready to record. You only need the app when you want to change settings.

What you need:

  • A phone with a USB-C port
  • The Wave Go app for adjusting settings and updating firmware (iOS 17 or later, Android 8.0 or later), with Bluetooth turned on

For the best sound, update Wave Go to the latest firmware from the app before your first recording. If you have two transmitters, update with only one turned on.

Where to position Wave Go

Clip Wave Go to the middle of your chest. From there, your voice stays the same distance from the mic even when you’re moving around. If you’re interviewing someone or passing the mic around, slot the transmitter into the Smart Handle instead.

A few more things to watch:

  • Clip it to your outer layer. Tucked under a jacket or thick sweater, it can make Wave Go sound muffled.
  • Keep it away from necklaces, zippers, buttons, and long hair. Anything that brushes the mic shows up in your recording.
  • Avoid using your collar edge. It sits off to the side of your mouth, which can dull your voice.
  • Use the magnetic clip on shirts and collars, and the magnetic plate on thicker clothing like jackets.

Adjusting Wave Go settings

You set gain, Auto Gain, and noise suppression in the Wave Go app. Gain controls how loud Wave Go records your voice. Auto Gain sets it for you and keeps your level steady as you move around, which suits recording on the go. When you’re recording in one spot, like at your desk or in a room, turn Auto Gain off and set gain manually.

Auto Gain

Auto Gain keeps your level steady as you record. When you get loud, it brings your voice down so it doesn’t clip. When you get quiet, it brings it back up so it doesn’t drop out.

Manual gain

Turn Auto Gain off to set your level yourself. You get six steps from Low to High, and your level stays where you set it. It’s a good fit when you’re recording in one spot, like at your desk. For more information check out our guide on Automatic Gain vs Manual Gain.

Noise cancellation

Noise cancellation reduces background noise, like traffic. Press the receiver button to turn it on or off, or choose Off, Low, Medium, or High in the Wave Go app. The LEDs turn green while it’s on. Low works for most situations and keeps your voice sounding natural. Switch to Medium in louder spaces, and save High for very loud environments.

EQ Shift

EQ Shift automatically switches Wave Go’s sound profile between clip-on and the Smart Handle. Clipped to your chest, it brings back the clarity and presence your voice loses at that distance. In the Smart Handle, it adds warmth and body for a fuller voice up close.

Low-cut filter and dynamic range control

Both run at all times. The low-cut filter helps with rumble from wind, handling, and vibration. Dynamic range control smooths out sudden voice spikes, like a laugh or a shout.

Use the table as a starting point

Situation Placement Gain Noise cancellation Also use
Vlogging and talking to camera Center of chest Auto Gain Off (Low near steady traffic) Windscreen outdoors
Street interviews and busy places Smart Handle, close to whoever's talking Manual gain at Low, or one step up Low (Medium if it’s still noisy) Smart Handle windscreen outdoors
Windy outdoor shoots Center of chest, back to the wind Manual gain toward Low Low Windscreen
Two-person interviews and podcasts Same spot on both people Manual gain (test with a loud laugh) Off (Low if a fan or AC is running) Second Wave Go Transmitter
Tutorials and hands-free demos Center of chest, clear of your hands Auto Gain (Manual gain for the same level every take) Off Double-press to start recording
Live streams Center of chest Auto Gain Off (Low if a fan or traffic is audible) Smart Handle and charge-through port
At your desk on Windows or Mac Center of chest Auto Gain (Manual gain for the same level every call) Off with Voice Focus in Wave Link, Low without it Wave Link (optional)

Vlogging and talking to camera

Keep Wave Go centered on your chest so your voice stays even. Auto Gain keeps your level steady as your voice gets louder or quieter. If you’re heading somewhere crowded, switch to Manual gain. Noise cancellation can stay off, or go to Low if there’s traffic. If you’re outside, click the furry windscreen onto the transmitter, or slip the larger one over the Smart Handle head.

Street interviews and busy places

Start with Wave Go clipped on for your intro, then dock the transmitter in the Smart Handle when it’s time to talk to someone.

Set Manual gain to Low or one step above, and start Noise cancellation at Low. If background noise still comes through, try Medium.

Windy outdoor shoots

For windy outdoor shoots, put on the furry windscreen before you start recording. There’s one for the transmitter and one for the Smart Handle. Turn Auto Gain off so gusts don’t push your level around, set Manual gain toward the low end, and set noise cancellation to Low to reduce other background noise. If you can, turn your back to the wind or stand next to a wall.

Two-person interviews and podcasts

Add a second transmitter to record two people on one phone. For sit-down interviews and podcasts, use Manual gain to keep your level consistent, and set noise cancellation to Low if there’s background noise. How to Record Two People on One Phone has the full setup.

Tutorials and hands-free demos

When you’re recording in one spot, use Manual gain so every recording comes out at the same level, and turn noise cancellation off. With your phone on a tripod, you can double-press the transmitter button to start or stop recording depending on your camera app.

Live streams

Auto Gain is the easy pick for long live streams, since your volume drifts over hours of talking. Leave Noise cancellation Off, or set it to Low if there’s a fan or traffic you can hear. If things get loud mid-stream, press the receiver button to switch noise cancellation on without leaving your stream.

The transmitter lasts up to 8 hours on a charge, and docking it in the Smart Handle tops it up whenever you take a break. To help keep your phone powered too, connect a USB-C power source to the receiver’s charge-through port. Depending on how hard your phone is working, this charges it or slows the drain.

At your desk on Windows or Mac

Plug the receiver into your computer and select Wave Go as the microphone in your call or recording app. Auto Gain keeps your level steady, or switch to Manual gain if you want the same level on every call. You can still change settings from the Wave Go app on your phone.

For cleaner sound in a room with echo or background noise, run Wave Link with Voice Focus on, and turn noise cancellation off so your voice isn’t processed twice. Without Wave Link, set noise cancellation to Low.

FAQ

Where should I clip Wave Go for the best sound?


Clip it to the middle of your chest, on your outer layer.



Should I use Auto Gain or Manual gain?


Auto Gain is a good default for recording on the go. Switch to Manual gain when you’re recording in one spot, like at your desk or in a sit-down interview, so your level stays the same from take to take.



Which Noise cancellation level should I use?


Low works for most situations and keeps your voice sounding natural. Switch to Medium in louder spaces, and save High for very loud environments.



Does Noise cancellation remove wind noise?


Not reliably. Noise cancellation is built for steady background sound like traffic, not wind. The low-cut filter reduces some wind rumble automatically, but outdoors, put on the included furry windscreen.



Can I record two people on separate tracks?


Wave Go mixes both voices into a single mono track on your phone.



Does Wave Go record in 32-bit float?


Wave Go records at 24-bit / 48 kHz. Auto Gain adjusts your level as you record, so your voice doesn’t clip when you get loud.



Can I start recording without touching my phone?


Yes. Double-press the button on the transmitter or Smart Handle to start or stop recording in a compatible camera app on your phone.



Can I charge my phone while recording?


Yes. Plug a USB-C charger into the receiver’s 5 W charge-through port to help keep your phone powered while you record.



For a full rundown of features, check out our Wave Go overview.

PRODUCTS IN ARTICLE

Stay up to date with Elgato. Get our latest News, Guides, and Product Updates in your Google feeds.

Add Elgato as a preferred source

Was this article helpful?