MANUAL | QUICK START GUIDE

Elgato x Twitch Streaming Kit — Setup Guide

In this Guide

  1. What’s in the kit
    1. What else you need
  2. Prepare your PS5
    1. Update your system software
    1. Turn off HDCP
  3. Install MP600 ELITE
    1. PS5 Slim and PS5 Pro
    1. Original PS5
  4. Format MP600 ELITE and choose where games install
    1. Format the SSD
    1. Set MP600 ELITE as your install location
    1. Move games you already have
  5. Connect 4K X
    1. Playing in HDR
  6. Add 4K X to OBS Studio
    1. Capture game audio on Windows
    1. Capture game audio on Mac
  7. Set up PS5 audio and party chat
    1. Add your microphone
  8. Connect Twitch and go live
    1. Connect your Twitch account
    1. Choose your output settings
    1. Test, then go live
  9. Using the kit with Xbox Series X|S
  10. Troubleshooting
  11. Technical specifications
    1. 4K X
    1. MP600 ELITE SSD for PS5
    1. System requirements
  12. FAQ
  13. Get the Elgato x Twitch Streaming Kit

PS5 can already stream to Twitch on its own. With 4K X, a capture card, you play on your TV as usual while OBS Studio on your computer streams your gameplay to Twitch with your own overlays, alerts, and webcam. Kits that include MP600 ELITE add an SSD that slots into your PS5, so big games and their updates have room without you deleting anything.

You only turn off HDCP and install the SSD once. After that, going live means opening OBS Studio and clicking Start Streaming.

What’s in the kit

The kit comes in three setups. All three include 4K X and the cables to connect it. The other two add MP600 ELITE, a PCIe Gen4 SSD for PS5 with its heatsink already attached.

Setup What’s included Good fit for
4K X 4K X, USB-C cable, HDMI 2.1 cable Xbox Series X|S, or a PS5 that already has storage to spare
4K X + MP600 ELITE 1 TB 4K X, USB-C cable, HDMI 2.1 cable, MP600 ELITE 1 TB SSD for PS5 with pre-installed heatsink PS5 and PS5 Pro players who need room for a few more big games
4K X + MP600 ELITE 2 TB 4K X, USB-C cable, HDMI 2.1 cable, MP600 ELITE 2 TB SSD for PS5 with pre-installed heatsink PS5 and PS5 Pro players with a large game library

What else you need

  • A PS5 or PS5 Pro. Playing on Xbox Series X|S? See Using the kit with Xbox Series X|S below.
  • A TV or monitor to play on.
  • A second HDMI cable. The one that came with your PS5 works.
  • A PC or Mac with a USB 3.2 Gen 2 (10 Gbps) port. USB-A works too with a USB-C to USB-A cable rated for 10 Gbps. Full requirements are under Technical specifications.
  • OBS Studio, free for Windows and macOS.
  • A Twitch account.
  • A small Phillips screwdriver, if your kit includes MP600 ELITE.
  • An upload speed of 10 Mbps or more for a 1080p60 stream. How fast your internet should be to livestream covers what to check.

Prepare your PS5

Update your system software

PS5 needs current system software to use an M.2 SSD, so update before you install MP600 ELITE.

  1. On your PS5, go to Settings > System > System Software > System Software Update and Settings.
  2. Select Update System Software. If no update is listed, you’re already on the latest version.

Turn off HDCP

HDCP is copy protection that PS5 turns on by default. While it’s on, 4K X shows a black screen instead of your game. Turn it off before you connect 4K X. You only need to do this once.

  1. On your PS5, go to Settings > System > HDMI.
  2. Turn off Enable HDCP.

Note: Some games and apps won’t open with HDCP off, so turn Enable HDCP back on while you use them and off again before you capture.

Install MP600 ELITE

Skip this section if your kit is 4K X only.

MP600 ELITE goes into your PS5’s M.2 expansion slot with its low-profile heatsink already attached, so there’s nothing to add. The expansion slot cover goes back on with the heatsink in place.

Note: Turn your PS5 off completely (not Rest Mode) and unplug every cable before you start. Touch a grounded metal object to discharge static, and don’t turn your PS5 on while any cover is off.

PS5 Slim and PS5 Pro

Step 1: Lay your PS5 flat on a soft cloth on a stable surface.

Step 2: Remove the side panel marked with a triangle.

Step 3: Remove the screw from the expansion slot cover, then lift the cover off.

Step 4: Remove the screw and spacer from the M.2 slot.

Step 5: Move the spacer to the hole marked 80, the position for an M.2 2280 SSD like MP600 ELITE.

Step 6: Hold MP600 ELITE by its edges and line up the notch with the M.2 connector. Insert it at an angle until it’s fully seated, tilt it down onto the spacer, and secure it with the screw.

Step 7: Put the expansion slot cover back and secure it with its screw.

Step 8: Replace the side panel.

Original PS5

  1. Lay your PS5 down on a soft cloth with the PlayStation logo facing down and the power button facing you.
  2. Grip the top-left corner of the side panel, lift it slightly, and slide it to the right to remove it.
  3. Remove the screw from the M.2 expansion slot cover, then lift the cover off.
  4. Remove the screw from the spacer in position 110, then move the spacer to position 80.
  5. Line up MP600 ELITE’s notch with the M.2 connector and insert it until it’s fully seated. The other end rests on the spacer at 80.
  6. Secure MP600 ELITE with the screw you removed.
  7. Put the expansion slot cover back and secure it with its screw, then replace the side panel.

Format MP600 ELITE and choose where games install

Format the SSD

  1. Reconnect your PS5’s power and HDMI cables, then turn it on.
  2. The M.2 SSD format screen appears on its own the first time. Follow the on-screen prompts to format MP600 ELITE.

Set MP600 ELITE as your install location

Go to Settings > Storage > Installation Location and choose M.2 SSD Storage for PS5 games and apps. New downloads and updates now go to MP600 ELITE, and you can play them straight from it.

Move games you already have

Go to Settings > Storage > Console Storage > Games and Apps, select a game, choose Select Items to Move, check the games you want on MP600 ELITE, then select Move.

Connect 4K X

4K X sits between your PS5 and your TV. You play on the TV through passthrough with no added lag, while 4K X sends a copy of the picture to your computer.

  1. Connect your PS5’s HDMI port to HDMI IN on 4K X.
  2. Connect HDMI OUT on 4K X to your TV or monitor. Use the HDMI 2.1 cable from the kit for one connection and your PS5’s HDMI cable for the other.
  3. Connect 4K X to a USB 3.2 Gen 2 (10 Gbps) port on your computer with the included USB-C cable. On a USB-A port, use a USB-C to USB-A cable rated for 10 Gbps.
  4. Turn on your PS5. The light on 4K X turns blue once it receives your PS5’s signal.

If the light isn’t blue, here’s what each color means:

Light What it means
Blue Connected over USB 3 and receiving a signal from your PS5.
White Connected over USB 3, but no HDMI signal. Check the cable from your PS5 to HDMI IN and make sure your PS5 is on.
Orange Connected to a USB 2.0 port. Move 4K X to a USB 3.2 Gen 2 (10 Gbps) port.
Purple Updating firmware. Leave 4K X connected until it finishes.

Playing in HDR

Twitch streams in SDR, so HDR gameplay can look washed out to your viewers. You have two options:

  • Turn HDR off while you stream. On your PS5, go to Settings > Screen and Video > Video Output > HDR and select Off.
  • Keep playing in HDR. 4K X passes HDR10 through to your TV and can tone map the signal to SDR for your stream. For setup steps, see HDR tone mapping.

Add 4K X to OBS Studio

  1. Open OBS Studio. The first time you launch it, Auto-Configuration Wizard opens. Choose Optimize for streaming and follow the prompts. You can run it again anytime from Tools > Auto-Configuration Wizard.
  2. In the Sources panel, click + and choose Video Capture Device. Name it something clear, like “PS5”, and click OK.
  3. Under Device, select Elgato 4K X. Your PS5 home screen appears in the preview.
  4. Click OK.

If OBS Studio shows a black screen, close Elgato Studio or any other app using 4K X.

Capture game audio on Windows

In the same properties window, set Audio Output Mode to Capture audio only. If no audio shows up, select Use custom audio device and choose 4K X.

Capture game audio on Mac

OBS Studio on Mac doesn’t pick up capture card audio on its own. In Sources, click +, choose Audio Input Capture, and select 4K X.

Play something with sound to check. The PS5 meter in Audio Mixer moves when game audio comes through. If it stays flat, a headset plugged into your controller is the most common cause, which the next section covers.

Set up PS5 audio and party chat

PS5 sends game audio over HDMI, so 4K X picks it up with no extra setup. Plugging a headset into your DualSense controller changes that: PS5 sends audio to the headset instead of HDMI, and your stream goes silent. Pick the setup that matches how you play.

If you Do this
Don’t use PS5 party chat Leave the controller’s headset jack empty and connect your headset or mic to your computer. Game audio stays on HDMI. To hear the game in that headset, go to Edit > Advanced Audio Properties in OBS Studio and set your PS5 source to Monitor and Output.
Use PS5 party chat with a wired headset Connect Chat Link Pro between your controller and headset, and plug its third connector into the analog audio input on 4K X. Then switch 4K X’s audio input from HDMI Audio to Analog Audio in Elgato Studio. Game audio and your friends’ voices both reach OBS Studio.
Use an XLR microphone Connect your PS5 to the USB Aux port on Wave XLR Pro. Your console audio shows up as its own channel in Wave Link, and the same mic you stream with becomes your party chat mic. Connecting your console to Wave XLR Pro walks through the routing.

Note: If you connect Chat Link Pro to your computer instead of 4K X, use the line-in port, not the microphone port. Mic ports expect a different signal level and distort the audio. Chat Link Pro works with wired headsets that plug into the controller. USB and wireless headsets don’t use that jack. Our Chat Link Pro guide covers headset compatibility.

Monitoring through OBS Studio adds a small delay. If that throws you off, listen through your TV speakers instead, as long as your mic won’t pick them up.

Add your microphone

  1. In OBS Studio, go to Settings > Audio and select your mic under Mic/Auxiliary Audio.
  2. Speak at your normal volume and check that the mic meter in Audio Mixer peaks in the yellow, not the red.
  3. Optional: right-click the mic in Audio Mixer, choose Filters, and add Noise Suppression.

The video from 4K X reaches OBS Studio a moment after your voice does, so your commentary can land slightly early. If it does in a test recording, go to Edit > Advanced Audio Properties and add a small Sync Offset to your mic until the two line up.

Connect Twitch and go live

Connect your Twitch account

  1. In OBS Studio, go to Settings > Stream.
  2. Under Service, choose Twitch.
  3. Click Connect Account and sign in. If you’d rather not sign in through OBS Studio, paste your stream key from Twitch’s Creator Dashboard > Settings > Stream instead.

Choose your output settings

Stream at a quality your upload speed can hold. For most Twitch streams that’s 1080p60, while you keep playing at up to 4K120 on your TV through passthrough.

  1. Go to Settings > Video. Set Base (Canvas) Resolution and Output (Scaled) Resolution to 1920x1080, and Common FPS Values to 60.
  2. Go to Settings > Output and set Output Mode to Advanced. Open the Streaming tab.
  3. Under Video Encoder, choose a hardware encoder if you have one, such as NVIDIA NVENC H.264, AMD H.264, or Apple VT H.264. They use a dedicated chip and leave your CPU free.
  4. Set Rate Control to CBR, enter a Bitrate from the table below, and set Keyframe Interval to 2.
Stream quality Bitrate
1080p60 6,000 kbps
720p60 4,500 kbps
720p30 3,000 kbps

A clean 720p60 stream looks better than a 1080p60 stream that keeps dropping frames, so step down if your connection can’t hold 6,000 kbps. If you turn on Enhanced Broadcasting in Settings > Stream (OBS Studio 31.0 or later), Twitch picks the resolution and bitrate for you, and Twitch Partners and Affiliates can stream at up to 1440p.

Test, then go live

  1. Click Start Recording, play for a minute, then click Stop Recording and watch the file back. Check your gameplay, game audio, mic level, and sync.
  2. Click Start Streaming. Keep an eye on the status bar at the bottom of OBS Studio. If dropped frames start climbing, lower your bitrate by a few hundred kbps.

For scenes with your webcam, overlays, and alerts, our guide to livestreaming PS5 with OBS Studio goes further.

Using the kit with Xbox Series X|S

4K X works with Xbox Series X|S the same way it works with PS5. MP600 ELITE fits PS5 only, so Xbox players only need 4K X. Skip Prepare your PS5, Install MP600 ELITE, and Format MP600 ELITE, and start at Connect 4K X. For more on Xbox capture, see our roundup of the best Elgato capture cards for Xbox Series X or S.

Troubleshooting

Problem What to try
Black screen in OBS Studio

1. Check that Enable HDCP is off in Settings > System > HDMI on your PS5.

2. Close Elgato Studio or any other app using 4K X.

3. Unplug 4K X’s USB-C cable and plug it back in.

Light on 4K X is orange 4K X is on a USB 2.0 port. Move it to a USB 3.2 Gen 2 (10 Gbps) port.
Light on 4K X stays white 4K X isn’t getting a signal. Check the cable from your PS5 to HDMI IN and make sure your PS5 is on.
No game audio in OBS Studio

1. Unplug any headset from your controller, or set up one of the party chat options above.

2. On Windows, check that Audio Output Mode is set to Capture audio only in your PS5 source.

3. On Mac, check that you added an Audio Input Capture source for 4K X.

Viewers hear the game, but you don’t OBS Studio doesn’t play captured audio back to you by default. Listen through your TV, or turn on Monitor and Output in Edit > Advanced Audio Properties.
Your voice is out of sync with your gameplay Add a Sync Offset to your mic in Edit > Advanced Audio Properties until your voice lines up with the video.
Input lag while you play Play on the TV connected to HDMI OUT on 4K X, not on the OBS Studio preview. The preview runs slightly behind by design.
Stream looks washed out Your PS5 is sending HDR. Turn HDR off in Settings > Screen and Video > Video Output, or use tone mapping on 4K X.
Stream stutters or drops frames

1. Switch to a wired Ethernet connection if you’re on Wi-Fi.

2. Lower your bitrate by a few hundred kbps.

3. Drop to 720p60.

PS5 doesn’t show the M.2 SSD format screen

1. Turn your PS5 off and unplug it.

2. Check that MP600 ELITE is fully seated in the connector and secured with the screw.

3. Update your PS5 system software, then try again.

Still having trouble? Contact Elgato Support and we’ll take a closer look.

Technical specifications

4K X

Spec Value
Input and output HDMI 2.1 in (unencrypted), lag-free HDMI 2.1 passthrough out
Capture Up to 4K144, 1440p144, 1080p240
Passthrough Up to 4K144, 1440p240, 1080p240
HDR HDR10 passthrough up to 4K144, HDR10 capture up to 4K30, 1440p60 or 1080p120 (Windows), HDR to SDR tone mapping on device
VRR VRR passthrough
Audio input HDMI audio, analog line in
Connection USB-C 3.2 Gen 2 (10 Gbps)
Software Elgato Studio (free), OBS Studio, and other streaming apps

MP600 ELITE SSD for PS5

Spec Value
Interface PCIe Gen4 x4 NVMe, M.2 2280
Read speed Up to 7,000 MB/s
Cooling Pre-installed low-profile heatsink
Capacity 1 TB or 2 TB
Compatibility PS5 (original and Slim) and PS5 Pro. Not compatible with Xbox Series X|S.

System requirements

Requirement Windows Mac
OS Windows 10 (64-bit) or later macOS 11 or later
CPU 6th gen Intel Core i5 or AMD Ryzen 5, or better Apple M1, or Intel Core i5 (4th gen quad-core) or later
GPU NVIDIA GeForce GTX 10 series or better  
RAM 8 GB (dual channel) 4 GB
Connection USB 3.2 Gen 2 port USB 3.2 Gen 2 port
Console PS5, PS5 Pro, or Xbox Series X|S PS5, PS5 Pro, or Xbox Series X|S
Elgato Studio (for analog audio) Windows 11 (64-bit or ARM64) macOS 14.2 or later

FAQ

Do I need a computer to stream with 4K X?


Yes. 4K X connects to a PC or Mac running your streaming app, and your PS5 still plays to your TV through 4K X. If you want to stream without a computer, PS5 can broadcast on its own.



Does MP600 ELITE work with Xbox?


No. MP600 ELITE is made for the M.2 slot in PS5 and PS5 Pro. On Xbox Series X|S, you only need 4K X.



Does the expansion slot cover fit over MP600 ELITE’s heatsink?


Yes. The heatsink is low profile, so the cover goes back on as normal on PS5, PS5 Slim, and PS5 Pro.



Can I play games directly from MP600 ELITE?


Yes. Games installed on MP600 ELITE launch and run from it, the same as from your PS5’s built-in storage.



Can I add a webcam to my stream?


Yes. Connect your webcam to your computer and add it in OBS Studio as another Video Capture Device. PS5’s built-in broadcast only works with the PS5 HD Camera, while OBS Studio can use any webcam your computer supports.



Does Twitch support HDR?


No. Twitch streams in SDR. Turn HDR off on your PS5 while you stream, or use tone mapping on 4K X so your stream doesn’t look washed out.



Can I record while I stream?


Yes. Click Start Recording while you’re live, and OBS Studio saves a local copy at the same time.



Get the Elgato x Twitch Streaming Kit

Your PS5 now plays on your TV with no added lag while 4K X sends your gameplay to Twitch, and if your kit includes MP600 ELITE, your PS5 has room for the games you stream.

Find the setup that fits your console: Elgato x Twitch Streaming Kit